Adding Algo Devices into MS Teams

About this Video

• Video Title: Adding Algo Devices into MS Teams
• Channel: Everlea Group
• Speakers: (Not specified in the transcript)
• Duration: 00:06:57

Introduction

This video demonstrates how to register Algo IP endpoints directly with Microsoft Teams using their SIP Gateway. The process involves setting up a user in Microsoft Teams, configuring licensing, and using a pairing code to link the Algo device to the Teams account.

Key Takeaways

• Setting up a Microsoft Teams User: A user account in Microsoft Teams is required, typically configured with a shared device license and a 10-digit phone number (DID). A DID is mandatory for successful registration.
• Algo Device Configuration: The Algo device's firmware (version 5.3.2 or later) must have Microsoft Teams support enabled via the device's web interface. This involves navigating to advanced settings, enabling the Microsoft Teams support section, and rebooting the device.
• Pairing Code: After enabling Microsoft Teams support and rebooting, the Algo device generates a pairing code. This code is used to link the device with the Microsoft Teams account. The pairing code expires after a short time; a new code can be generated if necessary.
• Registration Process: The pairing code is entered into the Microsoft Teams admin portal to complete the registration. After pairing, the Algo device may require a final reboot. Successful registration is confirmed through the SIP registration status in the device's web interface and by testing a call.
• Time Required: The entire process takes approximately 10 minutes.